ABSTRACT
Background@#The military was one of the first groups in Korea to complete mass vaccination against the coronavirus disease 2019 (COVID-19) due to their high vulnerability to COVID-19.To confirm the effect of mass vaccination, this study analyzed the patterns of confirmed cases within Korean military units. @*Methods@#From August 1 to September 15, 2021, all epidemiological data regarding confirmed COVID-19 cases in military units were reviewed. The number of confirmed cases in the units that were believed to have achieved herd immunity (i.e., ≥ 70% vaccination) was compared with the number of cases in the units that were not believed to have reached herd immunity (< 70% vaccination). Additionally, trends in the incidence rates of COVID-19 in the military and the entire Korean population were compared. @*Results@#By August 2021, 85.60% of military personnel were fully vaccinated. During the study period, a total of 174 COVID-19 cases were confirmed in the 39 units. More local transmission (herd immunity group vs. non-herd immunity group [%], 1 [0.91] vs. 39 [60.94]) and hospitalizations (12 [11.01] vs. 13 [27.08]) occurred in the units that were not believed to have achieved herd immunity. The percentage of fully vaccinated individuals among the confirmed COVID-19 cases increased over time, possibly due to the prevalence of the delta variant. Nevertheless, the incidence rate remained lower in military units than in the general Korean population. @*Conclusion@#After completing mass vaccination, the incidence rates of COVID-19 infection in the military were lower than those in the national population. New cluster infections did not occur in vaccinated units, thereby suggesting that herd immunity has been achieved in these military units. Further research is needed to determine the extent to which levels of nonpharmacological intervention can be reduced in the future.
ABSTRACT
The purpose of this study was to compare the color of maxillary primary central incisors, lateral incisors, canines with the color of various composite resins using a spectrophotometer VITA Easyshade®V.One researcher measured the color of sound maxillary primary anterior teeth of 100 children aged 1 to 6 and specimens which were made by composite resins with a total of 10 types and 31 shades, and CIE L*, a*, b* values were obtained.There was no clinically recognizable color difference between the maxillary primary central and lateral incisors. However, the maxillary primary canines showed difference in color above the clinical acceptability threshold with the primary central and lateral incisors. These findings showed no significant color differences between men and women, and no significant color changes with age. A1 shade is the most common in all maxillary primary anterior teeth.Composite resins, which are thought to be similar to the color of maxillary primary anterior teeth were selected from 9 types of maxillary primary central incisors, 6 types of primary lateral incisors, 6 types of primary canines.
ABSTRACT
The purpose of this study is to evaluate changes of occlusion following the placement of preformed metal crown in the permanent first molar affected by severe caries or hypomineralization.The study was conducted on 24 patients who met the criteria among the patients with occlusion in the permanent first molar reaching the occlusal plane. Restorative treatment was performed on one first molar using preformed metal crown. Before treatment, immediately after treatment, after 4 weeks, and after 8 weeks, the T-scan Ⅲ was used for measuring distribution of bite force at the maximum intercuspal position, and overbite was measured with digital vernier calipers and change of dental midline was surveyed. After 8 weeks, questionnaires survey was conducted.In most cases, immediately after treatment, the distribution of bite force between the restored side and non-restored side of arch was reversed compared to before treatment, and the overbite was decreased. However, after 4 weeks, bite force of the left and right side was balanced and the distribution of bite force on the restored and non-restored permanent first molars had similar values. Also, the changed overbite and midline were returned to pre-treatment status and there was no significant temporomandibular joint and masticatory discomfort after treatment.In this study, it was confirmed that spontaneous occlusal equilibrium was achieved one month after the placement of preformed metal crown.
ABSTRACT
Background@#Excessive citrate load during therapeutic plasma exchange (TPE) can cause metabolic alkalosis with compensatory hypercarbia and electrolyte disturbances. If TPE is required immediately before ABO-incompatible (ABOi) liver transplant (LT) surgery, metabolic derangement and severe electrolyte disturbance could worsen during LT anesthesia.Case: We report two ABOi LT cases who received TPE on the day of surgery because isoagglutinin titers did not be dropped below 1:8. One case had a surprisingly high metabolic alkalosis with a pH of 7.73 immediately after tracheal intubation because of hyperventilation during mask bagging. The other experienced sudden ventricular tachycardia and blood pressure drop after surgical incision accompanied with severe hypokalemia of 1.8 mmol/L despite supplementation with potassium. @*Conclusions@#Special attention should be paid to patients who just completed TPE the operative day morning as they are vulnerable to severe acid-base disturbances and life-threatening ventricular arrhythmias in ABOi LT.
ABSTRACT
Background@#Generally, lactate levels > 2 mmol/L represent hyperlactatemia, whereas lactic acidosis is often defined as lactate > 4 mmol/L. Although hyperlactatemia is common finding in liver transplant (LT) candidates, association between lactate and organ failures with Acute-on-chronic Liver Failure (ACLF) is poorly studied. We searched the important variables for pre-LT hyperlactatemia and examined the impact of preoperative hyperlactatemia on early mortality after LT. @*Methods@#A total of 2,002 patients from LT registry between January 2008 and February 2019 were analyzed. Six organ failures (liver, kidney, brain, coagulation, circulation, and lung) were defined by criteria of EASL-CLIF ACLF Consortium. Variable importance of preoperative hyperlactatemia was examined by machine learning using random survival forest (RSF). Kaplan-Meier Survival curve analysis was performed to assess 90-day mortality. @*Results@#Median lactate level was 1.9 mmol/L (interquartile range: 1.4, 2.4 mmol/L) and 107 (5.3%) patients showed > 4.0 mmol/L. RSF analysis revealed that the four most important variables for hyperlactatemia were MELD score, circulatory failure, hemoglobin, and respiratory failure. The 30-day and 90-day mortality rates were 2.7% and 5.1%, whereas patients with lactate > 4.0 mmol/L showed increased rate of 15.0% and 19.6%, respectively. @*Conclusion@#About 50% and 5% of LT candidates showed pre-LT hyperlactatemia of > 2.0 mmol/L and > 4.0 mmol/L, respectively. Pre-LT lactate > 4.0 mmol/L was associated with increased early post-LT mortality. Our results suggest that future study of correcting modifiable risk factors may play a role in preventing hyperlactatemia and lowering early mortality after LT.
ABSTRACT
Traumatic bone cyst (TBC) is an asymptomatic lesion seen most in adolescents. TBC is found incidentally on routine panoramic examinations and appears as a relatively well-demarcated unilocular radiolucency with scalloped margins. Histological examination reveals a vacant cavity of cancellous bone usually unlined or very occasionally lined with a thin connective tissue layer. The lack of lining epithelial membrane is common histological feature. The most affected site is between the mandibular canine and third molar. The involvement of the mandibular symphysis is rare. The etiopathogenesis of the TBC is unclear. TBC is treated with surgical exploration and curettage; new bone is formed in place of the lesion within 6 - 12 months of surgery. Diagnosis of TBC prior to surgical intervention has limitations in most of the cases. Both of our patients were diagnosed through radiological examination and biopsy. Neither patient had a history of trauma. After surgery, the panoramic radiograph and CBCT were used to confirm bone healing.
ABSTRACT
The purpose of this study was to evaluate the effect of virtual reality distraction on pain and anxiety in children during local anesthesia. Local anesthesia was administered to 3 groups: a control group without distraction, a group watching TV, and a group using a virtual reality device. The pulse rate and oxygen saturation rate were measured before and at the time of local anesthesia to assess the patients’ pain and anxiety, and the Wong-Baker Faces Pain Rating Scale was completed after local anesthesia.The group using the virtual reality device had a significantly lower heart rate change and lower Wong-Baker Faces Pain Rating Scale score than those in the control group and the group watching TV (p The virtual reality device alleviated pain and reduced anxiety in children during local anesthesia.
ABSTRACT
The objective of this study is to analyze the shear bond strength of orthodontic buttons according to light tip distance and optic fiber diameter when an extended optic fiber was applied to the tip of a curing light unit.In this study, 315 extracted premolar teeth were divided into 3 groups. Orthodontic buttons were attached using no optic fibers (Group I), 3.0 mm diameter optic fibers (Group II), or 5.0 mm diameter optic fibers (Group III). Each group was divided into subgroups A - C (5.0, 10.0, and 15.0 mm light tip distance), respectively. Shear bond strength was then measured while varying the light tip distance.In group I, shear bond strength significantly decreased as the light tip distance increased. When the shear bond strength was evaluated according to the optic fiber diameter, no statistical significance was observed in group of 5.0 mm light tip distance. Compared with group IB, group IIIB showed significantly greater shear bond strength. Compared with group IC, all groups using 3.0 or 5.0 mm diameter optic fibers showed significantly greater shear bond strength.Therefore, when a curing light unit has poor accessibility, optic fibers with a large diameter should be considered.
ABSTRACT
Background@#The decrease in incidence of cervical dysplasia and carcinoma has not been as dramatic as expected with the development of improved research tools and test methods. The human papillomavirus (HPV) test alone has been suggested for screening in some countries. The National Cancer Screening Project in Korea has applied Papanicolaou smears (Pap smears) as the screening method for cervical dysplasia and carcinoma. We evaluated the value of Pap smear and HPV testing as diagnostic screening tools in a single institution. @*Methods@#Patients co-tested with HPV test and Pap smear simultaneously or within one month of each other were included in this study. Patients with only punch biopsy results were excluded because of sampling errors. A total of 999 cases were included, and the collected reports encompassed results of smear cytology, HPV subtypes, and histologic examinations. @*Results@#Sensitivity and specificity of detecting high-grade squamous intraepithelial lesion (HSIL) and squamous cell carcinoma (SCC) were higher for Pap smears than for HPV tests (sensitivity, 97.14%; specificity, 85.58% for Pap smears; sensitivity, 88.32%; specificity, 54.92% for HPV tests). HPV tests and Pap smears did not differ greatly in detection of low-grade squamous intraepithelial lesion (85.35% for HPV test, 80.31% for Pap smears). When atypical glandular cells were noted on Pap smears, the likelihood for histologic diagnosis of adenocarcinoma following Pap smear was higher than that of high-risk HPV test results (18.8 and 1.53, respectively). @*Conclusions@#Pap smears were more useful than HPV tests in the diagnosis of HSIL, SCC, and glandular lesions.
ABSTRACT
This study was performed to evaluate the effectiveness of the 2-step needle insertion technique to reduce pain during local anesthesia in children. Local anesthesia was performed bilaterally using conventional technique and a 2-step technique, and to compare the degree of pain using the 2-step with that using the conventional technique during local anesthesia using a pain scale.The pain scores were significantly different between the conventional technique and the 2-step insertion technique at 5.82 ± 2.14 and 2.57 ± 2.09, respectively (p The 2-step insertion technique is a simple and effective way to reduce pain during local anesthesia not only in children with a positive attitude to dental treatment, but also in children with negative attitudes, and is thought to be more effective if combined with application of topical anesthesia or distraction.
ABSTRACT
The purpose of this study was to compare the success rates of two pulp capping materials, BiodentineTM and RetroMTA®, used for partial pulpotomy in permanent molars after carious exposures and to compare the final restorative outcome of using composite resin to that of using a stainless steel crown. We studied children who were diagnosed with dental caries of permanent molars and underwent partial pulpotomy. The patients were followed up for more than 1 year. Clinical and radiographic evaluation were used to evaluate the success of each treatment. Fisher's exact test was used to compare the outcomes of two groups. For pulp capping agents, the success rate of using RetroMTA® was lower than that of using BiodentineTM(p < 0.05). Final restoration with composite resin was less successful than restoration with an stainless steel crown(p < 0.05). In combination of pulp capping agents and final restoration material, RetroMTA®- composite resin shows the lowest success rate(p < 0.05).
ABSTRACT
Tooth eruption involves a complex developmental process of tooth migration from the dental follicular origin to the final occlusion position in the oral cavity via the alveolar process. Disturbance of tooth eruption can occur at any point in a series of eruption stages; however, horizontal impaction of the mandibular first molar and primary retention of the primary mandibular second molar are rarely observed simultaneously. This study describes the treatment for two cases of horizontally impacted first molar with primary retention of primary molar. The primary retention of the primary mandibular second molar was extracted, and orthodontic traction was applied to the horizontally impacted primary mandibular first molar. Subsequently, displacement of the premolar tooth bud was improved and space regaining for eruption was achieved, guiding to normal eruption of the first molar.
ABSTRACT
The purpose of this study was to compare the remineralization effect of 38% silver diamine fluoride (SDF) and 5% sodium fluoride (NaF) varnish on artificially induced enamel caries.The present study standardized the physiochemical characteristics of the tooth structure using bovine teeth, realized the wash-off action of agents using a saliva, reproduced an environment similar to mouth through pH-cycling, and comparatively assessed the remineralization effect of 38% SDF and 5% NaF varnish in a non-destructive method using micro-CT. And the remineralized enamel surface structure was analyzed by scanning electron microscopy (SEM) and energy dispersive X-Ray spectroscopy (EDS). In both SDF and NaF varnish, mineral density (△Hounsfield unit value) and the volume of enamel restored to normal mineral density through remineralization gradually increased with time. And the SDF showed a much higher level of increase in mineral density at all depths and remineralized volume than NaF varnish. According to SEM analysis, the surface roughness decreased in the order of artificial saliva, NaF varnish and SDF. In addition, EDS analysis showed that silver ion was precipitated on the enamel surface in SDF group. In conclusion, SDF had a greater remineralization effect than NaF varnish on demineralized enamel.
ABSTRACT
BACKGROUND: Pathologic diagnosis of central nervous system (CNS) neoplasms is made by comparing light microscopic, immunohistochemical, and molecular cytogenetic findings with clinicoradiologic observations. Intraoperative frozen cytology smears can improve the diagnostic accuracy for CNS neoplasms. Here, we evaluate the diagnostic value of cytology in frozen diagnoses of CNS neoplasms. METHODS: Cases were selected from patients undergoing both frozen cytology and frozen sections. Diagnostic accuracy was evaluated. RESULTS: Four hundred and fifty-four cases were included in this retrospective single-center review study covering a span of 10 years. Five discrepant cases (1.1%) were found after excluding 53 deferred cases (31 cases of tentative diagnosis, 22 cases of inadequate frozen sampling). A total of 346 cases of complete concordance and 50 cases of partial concordance were classified as not discordant cases in the present study. Diagnostic accuracy of intraoperative frozen diagnosis was 87.2%, and the accuracy was 98.8% after excluding deferred cases. Discrepancies between frozen and permanent diagnoses (n = 5, 1.1%) were found in cases of nonrepresentative sampling (n = 2) and misinterpretation (n = 3). High concordance was observed more frequently in meningeal tumors (97/98, 99%), metastatic brain tumors (51/52, 98.1%), pituitary adenomas (86/89, 96.6%), schwannomas (45/47, 95.8%), high-grade astrocytic tumors (47/58, 81%), low grade astrocytic tumors (10/13, 76.9%), non-neoplastic lesions (23/36, 63.9%), in decreasing frequency. CONCLUSIONS: Using intraoperative cytology and frozen sections of CNS tumors is a highly accurate diagnostic ancillary method, providing subtyping of CNS neoplasms, especially in frequently encountered entities.
Subject(s)
Humans , Brain Neoplasms , Central Nervous System Neoplasms , Central Nervous System , Cytogenetics , Diagnosis , Frozen Sections , Meningeal Neoplasms , Methods , Neurilemmoma , Pituitary Neoplasms , Retrospective StudiesABSTRACT
The purpose of this study was to obtain instructions for size selection of prefabricated crown and tooth reduction by 3-dimensional analysis of the size and shape of the maxillary primary central and lateral incisors and prefabricated crowns (celluloid strip, resin veneered stainless steel, and zirconia crowns).The maxillary primary central and lateral incisors of 300 Korean children was scanned with three types of prefabricated crown to create standard three-dimensional tooth models and prefabricated crowns. The shapes of the prefabricated crowns and natural teeth were compared according to four parameters (mesio-distal width, height, labio-palatal width, and labial surface curvature coefficient) and calculated the amount of tooth reduction required for each prefabricated crown.The size 2 resin veneered stainless steel crown, size 1 zirconia crown, and size 2 celluloid strip crown were most similar in shape to the primary central incisor. The size 3 rein veneered stainless steel crown, size 2 zirconia crown, and size 3 celluloid strip crown were most similar to the primary lateral incisor.The amount of tooth reduction was similar in both maxillary primary central and lateral incisors. The incisal reduction was greatest for the zirconia crown. At the proximal surface, the zirconia and celluloid strip crowns required a similar amount of tooth reduction, but more than the resin veneered stainless steel crown. The labial surface reduction was greatest for the zirconia crown. The degree of lingual surface reduction was not significant among the three prefabricated crowns.Among the assessment parameters, mesio-distal crown width was the most important for choosing a prefabricated crown closest to the actual size of the natural crown.
Subject(s)
Child , Humans , Crowns , Incisor , Stainless Steel , ToothABSTRACT
This study evaluated the microleakage of three restorative materials and three tricalcium silicate-based pulp capping agents. The restorative materials were composite resin (CR), resin-reinforced glass ionomer cement (RMGI), and traditional glass ionomer cement (GIC) and the pulp capping agents were TheraCal LC® (TLC), Biodentine® (BD), and ProRoot® white MTA (WMTA). Additionally, shear bond strengths between the pulp-capping agents and dentine were compared.Class V cavities were made in bovine incisors and classified into nine groups according to the type of pulp-capping agent and final restoration. After immersion in 0.5% fuchsin solution, each specimen was observed with a stereoscopic microscope to score microleakage level. The crowns of the bovine incisors were implanted into acrylic resin, cut horizontally, and divided into three groups. TLC, BD and WMTA blocks were applied on dentine, and the shear bond strengths were measured using a universal testing machine.The microleakage was lowest in TLC + GIC, TLC + RMGI, TLC + CR, and BD + GIC groups and highest in WMTA + RMGI and WMTA + CR groups. The shear bond strength of BD group was the highest and that of WMTA group was significantly lower than the others.
Subject(s)
Crowns , Dental Pulp Capping , Dentin , Glass Ionomer Cements , Immersion , Incisor , Pemetrexed , Pulp Capping and Pulpectomy Agents , Rosaniline DyesABSTRACT
We present two cases of percutaneous sacroplasty for sacral body fracture (Denis 3) and sacral alar fracture under multislice computed tomography (MSCT) guidance and discuss the clinical results and technical considerations. Sacroplasty is often recommended for the treatment of painful sacral insufficiency fractures, which destabilize the sacrum. However, sacroplasty for Denis zone 3 is rare because of the lack of validating controlled studies or unique technical considerations related to sacral anatomy. We performed sacroplasty for Denis zone 3 via the transiliac approach. Precise needle placement and polymethylmethacrylate cement injection were performed safely under the MSCT system. No complications occurred related to this procedure, such as iliac fracture, vascular leakage, or epidural leakage. MSCT-guided transiliac sacroplasty was a useful and effective solution in treating sacral body fracture.
Subject(s)
Fractures, Stress , Multidetector Computed Tomography , Needles , Polymethyl Methacrylate , SacrumABSTRACT
The purposes of this study were to evaluate microleakage of Biodentine, one of the tricalcium silicate based pulp-capping materials, and to compare the shear bond strength between composite resin and Biodentine with different setting times. For microleakage evaluation, 70 bovine teeth were used. Cavities were formed on the labial surfaces and filled with Biodentine. The teeth were divided into seven groups, each consisting of 10 teeth. The specimens were prepared by applying the composite resin on the upper side after different setting times. To evaluate shear bond strength, 210 acrylic resin blocks with central grooves were prepared, and the grooves were filled with Biodentine. The acrylic resin blocks were divided into seven groups of 30 specimens each, and the specimens were prepared by applying the composite resin on the upper side after different setting times.In samples with setting time of 24 hours or longer period, the microleakage between composite resin and Biodentine was reduced significantly while the shear bond strength increased to offset the polymerization shrinkage of the composite resin. Setting Biodentine for more than 24 hours before composite resin restoration would lead to more favorable clinical result.
Subject(s)
Polymerization , Polymers , Silicates , ToothABSTRACT
The purpose of this study was to provide clinical recommendations for restoration with selection of the most similar zirconia crown by 3-dimensional analysis of the shape of the maxillary primary central and lateral incisors in Korean individuals and prefabricated zirconia crowns.The average shape of the sound maxillary primary central and lateral incisors in 300 children was reproduced by 3-dimensional scanning. Zirconia crowns of 4 manufacturers (NuSmile ZR® Crown, Cheng Crowns®, Kinder Krowns®, and EZ Pedo® Crown) were scanned 3-dimensionally, and coordinates for comparison of the shape were measured to evaluate the similarity between the teeth and crowns. The most similar crowns were selected by comparing the mesiodistal length, crown height, crown shape ratio, distance between the same coordinates of a tooth and crown, the radius of curvature of the labial surface, and the volume.As a result of analysis, Cheng Crowns® size 3 and NuSmile ZR® Crown size 2 were the most similar crowns in the maxillary primary central and lateral incisors, respectively. Scanning the inner surface of the crowns and evaluating the amount of tooth reduction required suggested that an overall lesser amount of tooth reduction compared to that presented by the manufacturer's guidelines should be performed.